HEWI Apartment door fitting


Lever handle design 111X


111XAB03.139

B-technology Surface finish: A = satin


Product information

in B-technology with roses according to DIN 18255 and EN 1906 made of stainless steel, consisting of:
Knob model 109X made of stainless steel and Lever handle 111X... made of stainless steel tube (1.4301), diameter 21.3 mm with 1.5 mm wall thickness, with stepped shoulder guide and groove, with set screw M5 as additional fixing of lever and spindle for optimal transfer of force to door leaf.
the lever handle meets the standards of DIN 18040.
Installed by simply latching the lever handle into the base parts preassembled on the door. The latching can be released using the dismantling tool.
Roses: model 305.21X... and 306.23X..., 305.21X... composite synthetic material rose substructure, integrated spring-assisted restraining "hold-up" module, can be used for left or right-hand opening doors. Fixed rotating bearing of the lever handle with automatically latching all-round locking and 5 mm journal as maintenance-free plain bearing with elastic compensating area, to cancel the possible mounting inaccuracies. Concealed, non-loosening screwed joint with 5 mm Spax screws as well as the pivot disappearing into the door leaf.
Rose cap round, made of stainless steel (1.4301), diameter 55 mm, 10.5 mm high, 1.5 mm wall thickness.
Surface satin finished

Technical specifications

Material and colour
Surface
XA

Certificates

  • DIN 18040-1

Downloads

HEWI colour chart
Installation instructions (de, en, fr, nl, it, es, pl)
2D drawing
Product Data Sheet
Tender specifications
Download everything

Ordering information

Ordering information
  • Door thickness
  • Lever spindle
  • Keyway


In so far as only the item number is provided when ordering, we assume the following standard configuration is required:
Standard door fitting: door thickness = 40 mm, square spindle = 8 mm, keyway PZ
Further fitting-variations can be assembled from separate components

Classification

Designed and tested for the projects segment, user category to EN 1906 - Class 2 or Class 3
Category of use: Class 2 fitting with spindle 7 mm
Category of use: Class 3 fitting with spindle 8 - 8.5 mm
Durability: Class 7
Door weight: No classification specified
Fire resistance: Class 0
Safety: Class 0
Corrosion resistance: Class 4
Burglary protection: Class 0
Design-type: A
I agree

This website uses cookies to allow you to use the website to the optimum. Confirm that you agree to the use of the cookies by continuing to navigate through our website.

> Find out more

Please enter the email address by which you're registered here at HEWI.
We'll send you an email with instructions on how to change your password.
Request for password change failed. Reasons for this could be:
  1. The e-mail address is not registered.
  2. You have recently requested a password change. It must be at least an hour before you can perform the Forgot Password function again.
Log In
The request to change your password has been made. You will now receive an e-mail with a link to assign a new password.