HEWI Fire door fitting


Lever handle design 104X


100XAH11.4B0

H-technology Surface finish: A = satin

 
 
 
 
 
 

Product information

in H-technology with roses according to DIN 18255 and EN 1906 made of stainless steel, consisting of:
Lever handle 104X... made of square stainless steel tube in mitre cut (1.4301), 20 x 20 mm with 1.5 mm wall thickness, with stepped shoulder guide and groove, with set screw M5 as additional fixing of lever and spindle, for optimal transfer of force to door leaf.
The lever handle fulfils the guidelines of the German Federal Association of Accident Insurers "Bundesverbandes der Unfallkassen e. V." BUK - safety margin to closing edge 25 mm. The lever fulfils the requirements of EN 179.
Installed by simply latching the lever handle into the base parts preassembled on the door. The latching can be released using the dismantling tool.
Roses: model 317.21X... and 318X..., 317.21X... composite synthetic material and steel rose substructure with black zinc/nickel surface for optimum corrosion protection, integrated spring-assisted restraining "hold-up" module, can be used for left or right-hand opening doors, supporting the lock for longer durability. Fixed rotating bearing of the lever handle with automatically latching all-round locking and 5 mm journal as maintenance-free plain bearing with elastic compensating area, to cancel the possible mounting inaccuracies.
Rose cap rectangular, made of stainless steel (1.4301), 33 x 72 mm, 11.3 mm high, 1.5 mm wall thickness.
Surface satin finished

Technical specifications

Material and colour
Surface
XA

Certificates

  • "Ü" sign fire door fitting
  • EN 179
  • Fire protection

Downloads

HEWI colour chart
Installation instructions (de, en, fr, nl, it, es, pl)
Product Data Sheet
Tender specifications
Download everything

Design Awards

  • Iconic Awards 2013

Ordering information

Ordering information
  • Door thickness
  • Lever spindle
  • Keyway


In so far as only the item number is provided when ordering, we assume the following standard configuration is required:
Fire door fitting: door thickness = 48 mm, square spindle = 9 mm, keyway PZ
Further fitting-variations can be assembled from separate components

Classification

Designed and tested for the projects segment, user category to EN 1906 - Class 4 fire door fitting with spindle 9 mm, according to DIN 18273
Category of use: Class 4
Durability: Class 7
Door weight: No classification specified
Fire resistance: Class B1
Safety: Class 1
Corrosion resistance: Class 4
Burglary protection: Class 0
Design-type: A
I agree

This website uses cookies to allow you to use the website to the optimum. Confirm that you agree to the use of the cookies by continuing to navigate through our website.

> Find out more

Please enter the email address by which you're registered here at HEWI.
We'll send you an email with instructions on how to change your password.
Request for password change failed. Reasons for this could be:
  1. The e-mail address is not registered.
  2. You have recently requested a password change. It must be at least an hour before you can perform the Forgot Password function again.
Log In
The request to change your password has been made. You will now receive an e-mail with a link to assign a new password.