HEWI Fire door fitting


Lever handle design 166.21P


162PCR11.640

 
 
 
 
 
 
 
 

Product information

in R-technology with roses according to DIN 18255 and EN 1906 made of polyamide, high gloss surface, consisting of:
Lever handle model 166.21P... in mitre cut, made of polyamide with continuous steel core into the end of the lever handle, solid colour, diameter 21.3 mm, with stepped shoulder guide and groove, easily installed by latching the lever handle into the base parts pre-mounted on the door. The lever handle fulfils the guidelines of the German Federal Association of Accident Insurers Bundesverbandes der Unfallkassen e. V." - BUK (safety margin to closing edge 25 mm).
The latching can be released using the dismantling tool. The lever handle meets the standards of EN 179.
Roses: model 315.21R... and 316RFS, composite synthetic material and steel rose substructure with black zinc/nickel surface for optimum corrosion protection, integrated spring-assisted restraining "hold-up" module, can be used for left or right-hand opening doors, supporting the lock for longer durability. Fixed rotating bearing of the lever handle with automatically latching all-round locking and 5 mm journal as maintenance-free plain bearing with elastic compensating area, to cancel the possible mounting inaccuracies. Concealed, non-loosening screwed joint.
Rose cover cap, oval, made of high-quality polyamide, solid colour, 31 x 72 mm, 10 mm high, 1.5 mm wall thickness.
Designed and tested for contract use, category of use according to EN 1906 - Class 4 fire door set with square spindle 9 mm, according to DIN 18273
Category of use: Class 4
Durability: Class 7
Door mass: No classification specified
Fire resistance: Class D1
Security: Class 1
Corrosion resistance: Class 4
Anti-burglar protection: Class 0
Design type: U

Technical specifications

Material and colour
Colors
Polyamide
98
99
92
90
86
84
Alternative colors
Polyamide, mat
99
92
90

Certificates

  • EN 179
  • Fire protection

Downloads

HEWI colour chart
Product Data Sheet
Tender specifications
Download everything

Ordering information

Ordering information
  • Door thickness
  • Lever spindle
  • Keyway
  • Color


In so far as only the item number is provided when ordering, we assume the following standard configuration is required:
Fire door fitting: door thickness = 48 mm, square spindle = 9 mm, keyway PZ
Further fitting-variations can be assembled from separate components

Classification

Designed and tested for contract use, category of use according to EN 1906 - Class 4 fire door set with square spindle 9 mm, according to DIN 18273
Category of use: Class 4
Durability: Class 7
Door mass: No classification specified
Fire resistance: Class D1
Security: Class 1
Corrosion resistance: Class 4
Anti-burglar protection: Class 0
Design type: U
I agree

This website uses cookies to allow you to use the website to the optimum. Confirm that you agree to the use of the cookies by continuing to navigate through our website.

> Find out more

Please enter the email address by which you're registered here at HEWI.
We'll send you an email with instructions on how to change your password.
Request for password change failed. Reasons for this could be:
  1. The e-mail address is not registered.
  2. You have recently requested a password change. It must be at least an hour before you can perform the Forgot Password function again.
Log In
The request to change your password has been made. You will now receive an e-mail with a link to assign a new password.