HEWI Half fitting with security escutcheon


Lever handle design 162.21P


162PBR22.230

Matt edition

 
 
 
 
 
 
 
 

Product information

in R technology with polyamide roses to DIN 18255 and EN 1906 made of matt polyamide, consisting of:
Lever handle 162.21PBR in mitre form made of matt polyamide with continuous steel core up to the handle end, solid colour, diameter 21.3 mm, with stepped shoulder guide and groove, easily installed by latching the lever handle into the base parts pre-mounted on the door.
The latching can be released using the dismantling tool.
Rose 305.21PBR, rose substructure made of synthetic material-stainless steel composite, can be used for left and right-hand opening doors. Fixed rotating bearing of the lever handle with automatically latching all-round locking and 5 mm journal as maintenance-free plain bearing with elastic compensating area and second journal in the neck of the lever handle. Concealed, non-loosening screwed joint with M4 screw and sleeve combination as well as lug disappearing into the door leaf.
Rose cap, round, made of matt polyamide, solid colour, diameter 55 mm, 10.5 mm high, flat, 1.5 mm wall thickness.
Security escutcheon 306.23PBES, in composite polyamide-steel,
external rose diameter 55 mm, 10.5 mm high,
hardened bottom section, in conical design, as protection against forced turning off
internal rose FR design, diameter 55 mm, 10.5 mm high,
concealed screw joint, for installation in pairs, supplied with M5 screws,
holes for profile cylinder (PC and KABA), for cylinder protrusions: 7 - 12 mm
The security escutcheon corresponds with the specifications of DIN 18273
Designed and tested for contract use, category of use according to EN 1906 - Class 4 set with square spindle 8 - 8.5 - 10 mm, class 4 fire door set with square pin 9 mm, according to DIN 18273
Category of use: Class 4
Durability: Class 7
Door mass: No classification specified
Fire resistance: Class D1 - with fire door set
Fire resistance: Class 0 - if not fire door set
Security: Class 1
Corrosion resistance: Class 4
Anti-burglar protection: Class 1
Design type: U

Technical specifications

Material and colour
Colors
Polyamide, mat
99
92
90
Alternative colors
Polyamide
98
99
92
90
86
84

Downloads

HEWI colour chart
Product Data Sheet
Tender specifications
Download everything

Ordering information

Ordering information
  • Door thickness
  • Lever spindle
  • Keyway
  • Dimension x
  • Color


Further fitting-variations can be assembled from separate components

Classification

Designed and tested for contract use, category of use according to EN 1906 - Class 4 set with square spindle 8 - 8.5 - 10 mm, class 4 fire door set with square pin 9 mm, according to DIN 18273
Category of use: Class 4
Durability: Class 7
Door mass: No classification specified
Fire resistance: Class D1 - with fire door set
Fire resistance: Class 0 - if not fire door set
Security: Class 1
Corrosion resistance: Class 4
Anti-burglar protection: Class 1
Design type: U
I agree

This website uses cookies to allow you to use the website to the optimum. Confirm that you agree to the use of the cookies by continuing to navigate through our website.

> Find out more

Please enter the email address by which you're registered here at HEWI.
We'll send you an email with instructions on how to change your password.
Request for password change failed. Reasons for this could be:
  1. The e-mail address is not registered.
  2. You have recently requested a password change. It must be at least an hour before you can perform the Forgot Password function again.
Log In
The request to change your password has been made. You will now receive an e-mail with a link to assign a new password.