HEWI Product set washbasin and fitting


M40.11.101 / AQ1.12S20040
Not available in USA

Product information

Washbasin M40.11.101
  • made of mineral composite with non-porous surface, alpine white
  • wall-mounted or with washbasin base unit M40.72.1100... combinable
  • with shelf and oval basin
  • without overflow, with drain edge, prepared for single hole mixer tap
  • weight capacity to EN 14688, for hanger bolt fixing
  • 658 mm wide and 526 mm deep
  • CE marking according to Construction Products Regulation No. 305/2011
Electronic washbasin fitting AQ1.12S20040
  • high-quality chrome-plated, round
  • flow rate 5 l/min, for cold/mixed water, noise class 1, mains operation 230 V
  • cold water: 3/8" T-distributor necessary, see accessories Art. No. 111736
  • laminar jet controller with dynamic flow control 5 l/min, angle adjustable and anti-theft protection
  • adjustable, active, nuisance tripping-resistant infrared sensors
  • electronic module with adjustable sensing range, hygiene flushing, continuous flushing and cleaning mode
  • sensor parameters preset in the factory: after-run time: approx. 1-2 s, continuous running: 4 min, sensing range: 200 mm, cleaning mode: 60 s, hygiene flushing is deactivated
  • asymmetrical sensing range, stable object detection
  • settings and service also possible by means of app via smartphone, see accessories Art. No. 65713
  • safety shutdown in the event of failure of the operating voltage, user-defined settings are retained
  • without temperature adjustment lever: highly hygienic, vandal/misuse resistant
  • the preset temperature lies within the comfort zone from 30 °C to 36 °C
  • temperature settings and adjustment can be easily made during installation due to side access
  • connection via flexible pressure hoses with woven-in hot-cold marking 450 mm long, G 3/8"
  • brass fitting body
  • 118 mm high, projection: 158 mm
  • rigid outlet, without waste fittings, integrated dirt trap screens
  • suitable for thermal disinfection according to DVGW W 551
  • conforms EN 15091, with WELL Label

Technical specifications

Material and colour
Surface fitting


  • HEWI sensoric


HEWI colour chart
Operating instructions sensor setting (de, en, fr, nl, it, es, pl)
Installation instructions (de, en, fr, nl, it, es, pl)
Care tips (de, en, fr, nl, it, es, pl)
Cleaning and Care Instructions (en)
Tender specifications
Download everything

Design Awards

  • iF design award 2017
  • German Design Award 2018 - Winner
  • Interior Innovation Award 2013 - Best of Best
I agree

This website uses cookies to allow you to use the website to the optimum. Confirm that you agree to the use of the cookies by continuing to navigate through our website.

> Find out more

Please enter the email address by which you're registered here at HEWI.
We'll send you an email with instructions on how to change your password.
Request for password change failed. Reasons for this could be:
  1. The e-mail address is not registered.
  2. You have recently requested a password change. It must be at least an hour before you can perform the Forgot Password function again.
Log In
The request to change your password has been made. You will now receive an e-mail with a link to assign a new password.