HEWI Product set washbasin and fitting


950.19.069

950.11.161 / AQ1.12M10140
Not available in USA


Product information

Washbasin 950.11.161
  • made of mineral composite material with non-porous surface
  • with gushing edge to wall
  • with shelf and deep rectangular basin with generous radii
  • integrated ergonomic handle to hold onto on the side, can also be used as a towel holder
  • without overflow, prepared for single hole mixer tap
  • wheelchair accessible to DIN 18040 and ├ľNORM B1600/1601
  • loading capacity to EN 14688
  • 650 mm wide, 550 mm deep
  • CE marking according to Construction Products Regulation No. 305/2011
and
Single-lever washbasin mixer tap AQ1.12M10140
  • high-quality chrome-plated, round
  • flow rate 5 l/min, noise class 1
  • ceramic cartridge Kerox K-35OP, pressure resistant up to 35 bar
  • laminar jet controller with dynamic flow control 5 l/min, angle adjustable and anti-theft protection
  • connection via flexible pressure hoses with woven-in hot-cold marking 450 mm long, G 3/8
  • brass fitting body
  • open operating lever with hot-cold marking
  • 140 mm high, projection 160 mm
  • rigid outlet, without waste fittings
  • suitable for thermal disinfection according to DVGW W 551
  • DVGW certified, with WELL label

Technical specifications

Material and colour
Surface fitting
Chr
Features

Downloads

HEWI colour chart
Installation instructions (de, en, fr, nl, it, es, pl)
Care tips (de, en, fr, nl, it, es, pl)
Cleaning and Care Instructions (en)
Tender specifications
Download everything

Design Awards

  • iF design award 2017
  • German Design Award 2018 - Winner
  • Interior Innovation Award 2013 - Best of Best
I agree

This website uses cookies to allow you to use the website to the optimum. Confirm that you agree to the use of the cookies by continuing to navigate through our website.

> Find out more

Please enter the email address by which you're registered here at HEWI.
We'll send you an email with instructions on how to change your password.
Request for password change failed. Reasons for this could be:
  1. The e-mail address is not registered.
  2. You have recently requested a password change. It must be at least an hour before you can perform the Forgot Password function again.
Log In
The request to change your password has been made. You will now receive an e-mail with a link to assign a new password.