HEWI Vacant/engaged fitting


Lever handle design 101X


100XAL02.1A0

Surface finish: A = satin

 
 
 
 
 

Product information

Flat roses according to DIN 18255 and EN 1906 made of stainless steel, consisting of:
Lever handle 101X... made of square stainless steel tube in mitre cut (1.4301), 20 x 20 mm with 1.5 mm wall thickness, with stepped shoulder guide and groove, with set screw M5 as additional fixing of lever and spindle, for optimal transfer of force to door leaf.
Flat roses 307.20SX... and 308X..., made of stainless steel (1.4301), square, 52 x 52 mm, 3.0 mm high. Concealed, non-loosening connection: Fixed rotating bearing of the lever handle and the roses, and in the door leaf dipping support pin. Toilet version with emergency opening by means of coin and optionally with or without occupancy disc (red/green indicator) on the outside.
Satin surface

Technical specifications

Material and colour
Surface
XA

Downloads

HEWI colour chart
Installation instructions (de, en, fr, nl, it, es, pl)
Product Data Sheet
Tender specifications
Download everything

Design Awards

  • Iconic Awards 2013

Ordering information

Ordering information
  • Door thickness
  • Lever spindle
  • Emergency opening type
  • Dead latch spindle


In so far as only the item number is provided when ordering, we assume the following standard configuration is required:
Vacant/engaged fitting: door thickness = 40 mm, square spindle = 8 mm, emergency release with coin
When choosing the lock cylinder length please note the overall depth of the flat roses (3 mm each side)
Further fitting-variations can be assembled from separate components

Classification

Designed and tested for the projects segment, user category to EN 1906 - Class 2 or Class 4
Category of use: Class 2 fitting with spindle 7 mm
Category of use: Class 4 fitting with spindle 8 - 8.5 mm
Durability: Class 7
Door weight: No classification specified
Fire resistance: Class 0
Safety: Class 0
Corrosion resistance: Class 4
Burglary protection: Class 0
Type of operation: U
I agree

This website uses cookies to allow you to use the website to the optimum. Confirm that you agree to the use of the cookies by continuing to navigate through our website.

> Find out more

Please enter the email address by which you're registered here at HEWI.
We'll send you an email with instructions on how to change your password.
Request for password change failed. Reasons for this could be:
  1. The e-mail address is not registered.
  2. You have recently requested a password change. It must be at least an hour before you can perform the Forgot Password function again.
Log In
The request to change your password has been made. You will now receive an e-mail with a link to assign a new password.