HEWI Hinged support rail Duo


850 mm projection

Picture shows similar item
Picture shows similar item
Picture shows similar item
Picture shows similar item

Product information

  • with two gripping levels arranged above each other
  • upper rail is merged with the top rail at an angle of 135┬░
  • upper rail made of rectangular profile, 40 mm wide and 30 mm, provides a wide support surface and large radii for pleasant gripping, used to hold on tight and for support
  • bottom rail (diameter 25 mm) starts at a distance of 250 mm from the front edge of the upper rail and is used for holding on to and for turning in from the side
  • 850 mm projection, wall mounting plate 181 mm high and 130 mm wide
  • can be folded upwards and, folded downwards with braking mechanism
  • made of metal, high-quality chrome-plated
  • wall-mounting plate cover made of high-quality chrome-plated synthetic material
  • stable three-point fixing
  • for wall mounting with concealed, non-corrosive and tested fixing materials for different wall systems (must be ordered separately)
  • with toilet roll holder 950.50.01150, toilet roll holder with WC flushing mechanism and function button (radio-controlled) 950.50.06490 (right), 950.50.06590 (left), floor supports 950.50.020XA, 950.50.025XA, 950.50.026XA and arm pad 950.50.03192 for retrofitting
  • CE marking according to Directive 93/42/EEC
  • fulfils the DIN 18040, ├ľNORM B1600/1601 and SIA 500 requirements
  • weight capacity 100 kg

Supplied only with wall-specific HEWI fixing material (Stainless steel).

Technical specifications

Material and colour


  • CE mark


HEWI colour chart
Fixing Types
Ordering aid | Backrest rail with stationary hinged support rails 950
Drill holes
Installation instructions (de, en, fr, nl, it, es, pl, no, dk, se)
2D drawing
3D drawing
Product Data Sheet
Tender specifications
Download everything
Technical information subject to alteration
Please enter the email address by which you're registered here at HEWI.
We'll send you an email with instructions on how to change your password.
Request for password change failed. Reasons for this could be:
  1. The e-mail address is not registered.
  2. You have recently requested a password change. It must be at least an hour before you can perform the Forgot Password function again.
Log In
The request to change your password has been made. You will now receive an e-mail with a link to assign a new password.