HEWI Panic bar to EN 1125


PS111XA31

(BKS), glow - luminescent

Picture shows item in colour 73 (meadow green)
 
 

Product information

for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf)
Version for BKS-locks. Handle made of stainless steel, diameter 25 mm with tubular handle made of polyamide, diameter 30 mm. 20 mm wide luminescent rings on the two outer sides for orientation in case of light failure. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side, conforms to the requirements of DIN 18040. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm.
Mounting distance 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 301 - 1440 mm and 1441 - 1580 mm. Variable mounting distance: shorter bar (fixing centres > 761 mm) at customer request, specify exact measurement. For use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Concealed, tamper-resistant screw fixing with threaded screws M5. Gear unit and the thrust bearing with cover, width of the rosette 32 mm, width of the transmission unit 52 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit. Surface satin finished.
Information on the classification of the panic bar according to EN 1125 can be found in the certificates of the respective lock manufacturer.

Technical specifications

Material and colour
Surface/Colours
Panic bar
XA
Handle bar
98
99
92
90
33
73

Certificates

  • DIN 18040-1
  • EN 1125
  • Fire protection

Downloads

HEWI colour chart
Video panic bar
Video Panic bar glow
Certificates lock manufacturers DIN EN 1125
Installation instructions (de, en, fr, nl, it, es)
Product Data Sheet
Tender specifications
Download everything

Design Awards

  • Designpreis der Bundesrepublik Deutschland 2008 - Nominee
  • iF design award 2007
  • red dot award: Product Design 2007
  • universal design expert favorite 2014

Ordering information

The panic bars are telescopic (extendable) within the fixings centre-to-centre ranges:
436 - 485 mm
486 - 535 mm
536 - 585 mm
586 - 635 mm
636 - 685 mm
686 - 760 mm
761 - 860 mm
861 - 1010 mm
1011 - 1160 mm
1161 - 1300 mm
1301 - 1440 mm
1441 - 1580 mm

Classification

Designed and tested for projects,
classification to EN 1125
Category of use: Class 3
Durability: Class 7
Door mass: Class 6
Suitability for use on fire and smoke doors: Class B
Safety - personal protection: Class 1
Corrosion resistance: Class 3
Security - burglary protection: Class 2
Projection of device: Class 2
Type of device: A
Field of door application: Class A
I agree

This website uses cookies to allow you to use the website to the optimum. Confirm that you agree to the use of the cookies by continuing to navigate through our website.

> Find out more

Please enter the email address by which you're registered here at HEWI.
We'll send you an email with instructions on how to change your password.
Request for password change failed. Reasons for this could be:
  1. The e-mail address is not registered.
  2. You have recently requested a password change. It must be at least an hour before you can perform the Forgot Password function again.
Log In
The request to change your password has been made. You will now receive an e-mail with a link to assign a new password.