HEWI Vacant/engaged fitting


Lever handle design 111.23


111E02.270

E-technology


Product information

in E-technology with backplates according to DIN 18255 made of polyamide, high-polished surface, consisting of:
Lever handle model 111.23E U-shaped made of high-quality polyamide with corrosion resistant steel insert, solid colour, diameter 23 mm, with spring bolt connection on the square spindle. Easily installed by latching the male lever handle into the lever handle female part.
The latching can be released using the dismantling tool. the lever handle meets the standards of the DIN 18040.
Backplate: model 235.23ENR, synthetic material backplate substructure, can be used for left and right-hand opening doors, with self-adjusting, maintenance-free plain bearing. Concealed, non-loosening screwed joint with 5 mm Spax screws and the support/expansion pivot disappearing into the door leaf. WC version with emergency opening by means of square spindle or coin and occupancy disc (red/white indicator) on the outside.
Backplate cap made of high-quality polyamide, solid colour, 46 x 260 mm, 10.5 mm high, flat, 1.5 mm wall thickness.

Technical specifications

Material and colour
Colours
98
99
97
95
92
90

Certificates

  • DIN 18040-1

Downloads

HEWI colour chart
Installation instructions (de, en, fr, nl, it, es, pl)
Product Data Sheet
Tender specifications
Download everything

Ordering information

Ordering information
  • Door thickness
  • Lever spindle
  • Emergency opening type
  • Distance
  • Dead latch spindle
  • Colour


In so far as only the item number is provided when ordering, we assume the following standard configuration is required:
Vacant/engaged fitting: door thickness = 40 mm, square spindle = 8 mm, emergency release with coin, distance = 78 m
Further fitting-variations can be assembled from separate components

Classification

No classification according to EN 1906
I agree

This website uses cookies to allow you to use the website to the optimum. Confirm that you agree to the use of the cookies by continuing to navigate through our website.

> Find out more

Please enter the email address by which you're registered here at HEWI.
We'll send you an email with instructions on how to change your password.
Request for password change failed. Reasons for this could be:
  1. The e-mail address is not registered.
  2. You have recently requested a password change. It must be at least an hour before you can perform the Forgot Password function again.
Log In
The request to change your password has been made. You will now receive an e-mail with a link to assign a new password.