V 020223HEWI Produktkatalog                                                                                                     
ANPS111XA20      10Dr??ek antypaniczny HEWI zgodny z EN    1125                                    10PCE 00000000       2       
TN2              01         System 111 panic bar                    02         for equipping exit doors - approval to           
TN2              03         EN 1125 only in combination with tested 04         locks - with CE marking. Approved for            
TN2              05         fire and smoke doors, listing in the    06         national technical approval test                 
TN2              07         certificate of the respective door      08         manufacturer in conjunction with DIN             
TN2              09         18273, DIN 4102, DIN 1634, for single   10         leaf or double doorsets in escape                
TN2              11         routes (inactive or inactive and active 12         leaf)                                            
TN2              13         Handle made of stainless steel,         14         diameter 25 mm with tubular handle made          
TN2              15         of stainless steel, diameter 30 mm.     16         Handle tube positioned as one-sided              
TN2              17         handle, therefore clear visualisation   18         of the optimum pressure point on the             
TN2              19         lock side. The stainless steel tubes    20         are connected by a square bar -                  
TN2              21         telescopic. Low projection depending on 22         the operating angle of the lock                  
TN2              23         follower, but at least in accordance    24         with DIN 1125, grade 2:  761 mm) at              
TN2              25         customer request, specify exact         26         measurement. For use on timber and               
TN2              27         steel doors and metal frame doors,      28         backset from 35 mm (depending on                 
TN2              29         profile) as single or double doorset.   30         Concealed, tamper-resistant screw                
TN2              31         fixing with threaded screws M5. Gear    32         unit and the thrust bearing with cover,          
TN2              33         width of the rosette 27.7 mm, width of  34         the transmission unit 45 mm, no jamming          
TN2              35         due to splayed surfaces of the gear     36         unit cover on the lock side and                  
TN2              37         positioning of the push-bar on the      38         inside of the gear unit. Surface satin           
TN2              39         finished.                               40         Information on the classification of             
TN2              41         the panic bar according to EN 1125 can  42         be found in the certificates of the              
TN2              43         respective lock manufacturer.           44         Article no.: HEWI PS111XA20