V 020223HEWI Produktkatalog 04EUR A;N;PS111XA20;10;Dr??ek antypaniczny HEWI zgodny z EN;1125;1;0;PCE;0; ; ;2; T;N;2;;1;;System 111 panic bar ;2;;for equipping exit doors - approval to;; T;N;2;;3;;EN 1125 only in combination with tested;4;;locks - with CE marking. Approved for;; T;N;2;;5;;fire and smoke doors, listing in the;6;;national technical approval test;; T;N;2;;7;;certificate of the respective door;8;;manufacturer in conjunction with DIN;; T;N;2;;9;;18273, DIN 4102, DIN 1634, for single;10;;leaf or double doorsets in escape;; T;N;2;;11;;routes (inactive or inactive and active;12;;leaf);; T;N;2;;13;;Handle made of stainless steel,;14;;diameter 25 mm with tubular handle made;; T;N;2;;15;;of stainless steel, diameter 30 mm.;16;;Handle tube positioned as one-sided;; T;N;2;;17;;handle, therefore clear visualisation;18;;of the optimum pressure point on the;; T;N;2;;19;;lock side. The stainless steel tubes;20;;are connected by a square bar -;; T;N;2;;21;;telescopic. Low projection depending on;22;;the operating angle of the lock;; T;N;2;;23;;follower, but at least in accordance;24;;with DIN 1125, grade 2: 761 mm) at;; T;N;2;;25;;customer request, specify exact;26;;measurement. For use on timber and;; T;N;2;;27;;steel doors and metal frame doors,;28;;backset from 35 mm (depending on;; T;N;2;;29;;profile) as single or double doorset.;30;;Concealed, tamper-resistant screw;; T;N;2;;31;;fixing with threaded screws M5. Gear;32;;unit and the thrust bearing with cover,;; T;N;2;;33;;width of the rosette 27.7 mm, width of;34;;the transmission unit 45 mm, no jamming;; T;N;2;;35;;due to splayed surfaces of the gear;36;;unit cover on the lock side and;; T;N;2;;37;;positioning of the push-bar on the;38;;inside of the gear unit. Surface satin;; T;N;2;;39;;finished.;40;;Information on the classification of;; T;N;2;;41;;the panic bar according to EN 1125 can;42;;be found in the certificates of the;; T;N;2;;43;;respective lock manufacturer.;44;;Article no.: HEWI PS111XA20;;