V 020223HEWI Produktkatalog 04EUR A;N;PS160XA10;10;Dr??ek antypaniczny HEWI zgodny z EN;1125;1;0;PCE;0; ; ;2; T;N;2;;1;;System 162 panic bar ;2;;for equipping exit doors - approval to;; T;N;2;;3;;EN 1125 only in combination with tested;4;;locks - with CE marking. Approved for;; T;N;2;;5;;fire and smoke doors, listing in the;6;;national technical approval test;; T;N;2;;7;;certificate of the respective door;8;;manufacturer in conjunction with DIN;; T;N;2;;9;;18273, DIN 4102, DIN 1634, for single;10;;leaf or double doorsets in escape;; T;N;2;;11;;routes (inactive or inactive and active;12;;leaf);; T;N;2;;13;;Handle made of stainless steel,;14;;diameter 25 mm with tubular handle made;; T;N;2;;15;;of polyamide, diameter 30 mm. Handle;16;;tube positioned as one-sided handle,;; T;N;2;;17;;therefore clear visualisation of the;18;;optimum pressure point on the lock;; T;N;2;;19;;side, conforms to the requirements of;20;;DIN 18040. The stainless steel tubes;; T;N;2;;21;;are connected by a square bar -;22;;telescopic. Low projection depending on;; T;N;2;;23;;the operating angle of the lock;24;;follower, but at least in accordance;; T;N;2;;25;;with DIN 1125, grade 2: 761 mm) at;26;;customer request, specify exact;; T;N;2;;27;;measurement. For use on timber and;28;;steel doors and metal frame doors,;; T;N;2;;29;;backset from 35 mm (depending on;30;;profile) as single or double doorset.;; T;N;2;;31;;Concealed, tamper-resistant screw;32;;fixing with threaded screws M5. Gear;; T;N;2;;33;;unit and the thrust bearing with cover,;34;;width of the rosette 27.7 mm, width of;; T;N;2;;35;;the transmission unit 45 mm, no jamming;36;;due to splayed surfaces of the gear;; T;N;2;;37;;unit cover on the lock side and;38;;positioning of the push-bar on the;; T;N;2;;39;;inside of the gear unit. Surface satin;40;;finished.;; T;N;2;;41;;Information on the classification of;42;;the panic bar according to EN 1125 can;; T;N;2;;43;;be found in the certificates of the;44;;respective lock manufacturer.;; T;N;2;;45;;Article no.: HEWI PS160XA10;;;;;