Informacje o produkcie

Handrail, square 35 x 35 mm, solid beech

Wood/stainless steel handrail for horizontal installation areas, e.g. corridors, not for staircases,
Handrail made of square rails approx. 35 x 35 mm, one-piece lengths up to 2490 mm and stainless steel components.

Material: A quality kiln-dried wood.
Beech, without red heart, steam treated/European maple /European oak
Surface sanded 2x and final finish with 2x colourless surface protection (varnish).
Stainless steel 1.4301, surface sanded with grain 240.

The wooden components are connected to the stainless steel components by means of lock tight screw connections or dowels and adhesive.
Wall fixing by means of 90° end corners and straight supports

The end corners at the ends of the handrail consist of a 90° angle. Leg lengths approx. 80 mm with a cross-section of approx. 35 x 35 mm.
Wall-side end prepared for concealed wall fixing with fixing bolts.

a) Straight supports:
The straight supports consist of a square element. Length approx. 50 mm with a cross-section of approx. 30 x 30 mm (horizontal).
Wall-side end prepared for concealed wall fixing with fixing bolts.

alternatively

b) Angle supports:
The angle supports consist of a 90° angle. Leg lengths approx. 70 mm / 75 mm with a cross-section of approx. 15 x 35 mm (vertical) and approx. 35 x 35 mm (horizontal).
Wall-side end prepared for concealed wall fixing with fixing bolts.

Support spacing from 1,000 up to max. 1,250 mm, symmetrically arranged.
Clear distance from wall approx. 50 mm.

Handrail ends have 90° end corners. Design as described above.
Changes in direction by means of 90° corner pieces. Leg lengths approx. 80 mm with a cross-section
of approx. 35 x 35 mm.

Fixing surface: Masonry, concrete, double-layered dry walling with installation inlay made of wood.