for fixing on lightweight walls with rear lining made of laminated timber boards (with waterproof bonding, at least 30 mm thick required, e.g. studs or prewall installation)
Article number BM12.2.1
HEWI Fixing type
for Range 801 / 805 Classic backrest rails
For installation on stationary support and hinged support rails range 801 / 805 Classic with fixing BM 12.2 for use on lightweight walls with rear lining, e.g. laminated timber boards (waterproof bonding, min. 30 mm thickness required, for example, Support stand or wall installation). Consisting of: 2 stainless steel screws diameter 10 x 95 mm and 2 centring sleeves diameter 20/11 x 11.5 mm.
Recommendation! Please check the wall type on site in case of order!
Show more for Range 801 / 805 Classic backrest rails
For installation on stationary support and hinged support rails range 801 / 805 Classic with fixing BM 12.2 for use on lightweight walls with rear lining, e.g. laminated timber boards (waterproof bonding, min. 30 mm thickness required, for example, Support stand or wall installation). Consisting of: 2 stainless steel screws diameter 10 x 95 mm and 2 centring sleeves diameter 20/11 x 11.5 mm.
Recommendation! Please check the wall type on site in case of order!
EAN
4014884931837
article group
Fixing material
Fixing type
- for Range 801 / 805 Classic backrest rails
For installation on both sides on stationary support and hinged support rails range 801 / 805 Classic with fixing BM12.2 for use on lightweight walls with rear lining, e.g. laminated timber boards (waterproof bonding, min. 30 mm thickness required, for example, Support stand or wall installation)
Consisting of:
- 2 stainless steel screws diameter 10 x 95 mm
- 2 centring sleeves diameter 20/11 x 11.5 mm
- for Range 801 / 805 Classic backrest rails
For installation on both sides on stationary support and hinged support rails range 801 / 805 Classic with fixing BM12.2 for use on lightweight walls with rear lining, e.g. laminated timber boards (waterproof bonding, min. 30 mm thickness required, for example, Support stand or wall installation)
Consisting of:
- 2 stainless steel screws diameter 10 x 95 mm
- 2 centring sleeves diameter 20/11 x 11.5 mm
Documents
| Ausschreiben.de | Link | |
| Colour Chart | Link |
Products last viewed
L-shaped support rail
version left
Article number 900.22.30360 SC
Hinged support rail, rotatable
Wall mounting plate with stainless steel cover, 700 mm projection
Article number 805.50.110
Rose with turn knob
Article number 306PCMNR 99
Toilet roll holder
Article number 900Q21.00060 SC
Fixing material BM12.2.1
for fixing on lightweight walls with rear lining made of laminated timber boards (with waterproof bonding, at least 30 mm thick required, e.g. studs or prewall installation)
Article number BM12.2.1