AQ 950
Article number AQ1.12M109XA
HEWI single-lever washbasin mixer tap
PVD coated stainless steel look, cubic, suitable for thermal disinfection according to WRAS, noise class 1, WRAS certified., CE and UKCA marking according to EMC 2014/30/EU.
Show more
PVD coated stainless steel look, cubic, suitable for thermal disinfection according to WRAS, noise class 1, WRAS certified., CE and UKCA marking according to EMC 2014/30/EU.
EAN
4014885632047
Fitting
Single-lever washbasin mixer tap
Material
Stainless steel
Single lever washbasin mixer
- PVD coated stainless steel look, cubic
- Flow rate 5 l/min
- Ceramic cartridge Kerox K-35OP, pressure resistant up to 35 bar
- Laminar jet regulator with dynamic flow rate control 5 l/min, angle adjustable and theft-proof
- Connection via flexible pressure hoses with interwoven hot/cold marking 450 mm long, G 3/8"
- Brass fitting body
- Control lever with hot/cold marking
- 129 mm high, 187 mm projection
- rigid spout
- without drain set
- suitable for thermal disinfection according to WRAS
- Noise class 1
- WRAS certified
- CE and UKCA marking according to EMC 2014/30/EU
- PVD coated stainless steel look, cubic
- Flow rate 5 l/min
- Ceramic cartridge Kerox K-35OP, pressure resistant up to 35 bar
- Laminar jet regulator with dynamic flow rate control 5 l/min, angle adjustable and theft-proof
- Connection via flexible pressure hoses with interwoven hot/cold marking 450 mm long, G 3/8"
- Brass fitting body
- Control lever with hot/cold marking
- 129 mm high, 187 mm projection
- rigid spout
- without drain set
- suitable for thermal disinfection according to WRAS
- Noise class 1
- WRAS certified
- CE and UKCA marking according to EMC 2014/30/EU
Design awards
Awarded byDownloads
2D drawing | DXF | |
3DF | DXF | |
Product data sheet | ||
Installation instructions | ||
Test certificates |
Documents
BIM | Link | |
Colour Chart | Link |
Single lever washbasin mixer tap
AQ 950
Article number AQ1.12M109XA