{Matt edition
Article number 162PBMV01230 99}
HEWI Standard door fitting fitting with escutcheons
with flat rose, cap made of stainless steel (1.4301) matt in PVD-coating, Lever handle design 162.21PBM mitre cut made of matt polyamide with corrosion resistant steel insert, Square spindle 8 mm, for Austria 8,5 mm, with trapezoidal thread. Fixing of the lever handle in a press-in bearing and a polyamide plain bearing bush. With escutcheon 306PBM, 32 x 47 mm. Installation of the press-in bushes by means of a mounting nut with trapezoidal thread, AF 19. with an ring spanner, AF 19. We recommend mounting on both non-rebated and rebated finish residential and internal doors with HDF facing and middle layers (core) made of hollow (tubular) core particleboard or solid particleboard or higher-quality.
A current list of the tested door elements can be found under: www.hewi.de/mini.
Show more
with flat rose, cap made of stainless steel (1.4301) matt in PVD-coating, Lever handle design 162.21PBM mitre cut made of matt polyamide with corrosion resistant steel insert, Square spindle 8 mm, for Austria 8,5 mm, with trapezoidal thread. Fixing of the lever handle in a press-in bearing and a polyamide plain bearing bush. With escutcheon 306PBM, 32 x 47 mm. Installation of the press-in bushes by means of a mounting nut with trapezoidal thread, AF 19. with an ring spanner, AF 19. We recommend mounting on both non-rebated and rebated finish residential and internal doors with HDF facing and middle layers (core) made of hollow (tubular) core particleboard or solid particleboard or higher-quality.
A current list of the tested door elements can be found under: www.hewi.de/mini.
DIN Direction
Left/Right
EAN
4014885536383
Surface rose
matt copper
Colour
article number EAN
162PBMV01230 99
Perforation
PZ - profile cylinder
Square
8 mm
Technology
mini roses | Class 4
Door thickness
38,1 - 48,0 mm
Floor to wall stationary support
Round rose
Material
Polyamide, mat
Fitting type
Standard door fittings
Standard door fitting with escutcheons
with flat lever handle rose, cap made of stainless steel (1.4301), matt in PVD-coating, diameter 32 mm, consisting of:
door lever handle design 162.21PBM, mitred, made of matt polyamide with continuous steel core up to the end of the lever handle, through-dyed, diameter 21.3 mm, with shank guide. Square spindle of the male part of the lever handle 8 mm with trapezoidal thread, for Austria square pin in lock area 8.5 mm with trapezoidal thread.
Fixing of the lever handle in a press-in bearing with all-round teeth and a polyamide plain bearing bush with two lugs as anti-rotation elements in the press-in bearing. The grubscrew M5, as additional securing of the female parts of the lever handle, fixes itself in a recess in the square spindle and thus helps to achieve optimum force transfer into the door leaf.
With escutcheon 306VM made of stainless steel (1.4301) matt in PVD-coating, 32 x 47 mm, 1.5 mm high.
Use in conjunction with mortise locks to DIN 18251.
Installation of the press-in bushes by means of a mounting nut with trapezoidal thread, AF 19. We recommend installation using a ring spanner, AF 19. The cut size (hole dimension) in the area of the lock follower must have nominal size 25 mm. Production tolerances of +/- 1 mm can be levelled out by the press-in bearing. The cut size (hole dimension) in the area of the escutcheons (profile cylinder/warded lock) may have a max. size of 25 x 40 mm.
We recommend mounting on residential and internal doors with HDF facing and middle layers (core) made of hollow (tubular) core particleboard or solid particleboard or higher quality core, with both non-rebated and rebated finish. Please note that we only recommend mounting on door elements tested by HEWI. In addition, mini can also not be installed on untested door elements. In this case, HEWI cannot guarantee perfect installation and continuous fitness for use. A current list of the tested door elements can be found on our website: www.hewi.de/mini. Fittings with mini roses are not suitable for use on door elements with fire protection, smoke control, burglary resistance, wet room or radiation protection functions.
Designed and tested for the projects segment, user category to EN 1906 - Grade 4
Durability: Grade 7
Door weight: No classification specified
Fire resistance: Grade 0
Safety: Grade 1
Corrosion resistance: Grade 5
Security: Grade 0
Type of operation: U
with flat lever handle rose, cap made of stainless steel (1.4301), matt in PVD-coating, diameter 32 mm, consisting of:
door lever handle design 162.21PBM, mitred, made of matt polyamide with continuous steel core up to the end of the lever handle, through-dyed, diameter 21.3 mm, with shank guide. Square spindle of the male part of the lever handle 8 mm with trapezoidal thread, for Austria square pin in lock area 8.5 mm with trapezoidal thread.
Fixing of the lever handle in a press-in bearing with all-round teeth and a polyamide plain bearing bush with two lugs as anti-rotation elements in the press-in bearing. The grubscrew M5, as additional securing of the female parts of the lever handle, fixes itself in a recess in the square spindle and thus helps to achieve optimum force transfer into the door leaf.
With escutcheon 306VM made of stainless steel (1.4301) matt in PVD-coating, 32 x 47 mm, 1.5 mm high.
Use in conjunction with mortise locks to DIN 18251.
Installation of the press-in bushes by means of a mounting nut with trapezoidal thread, AF 19. We recommend installation using a ring spanner, AF 19. The cut size (hole dimension) in the area of the lock follower must have nominal size 25 mm. Production tolerances of +/- 1 mm can be levelled out by the press-in bearing. The cut size (hole dimension) in the area of the escutcheons (profile cylinder/warded lock) may have a max. size of 25 x 40 mm.
We recommend mounting on residential and internal doors with HDF facing and middle layers (core) made of hollow (tubular) core particleboard or solid particleboard or higher quality core, with both non-rebated and rebated finish. Please note that we only recommend mounting on door elements tested by HEWI. In addition, mini can also not be installed on untested door elements. In this case, HEWI cannot guarantee perfect installation and continuous fitness for use. A current list of the tested door elements can be found on our website: www.hewi.de/mini. Fittings with mini roses are not suitable for use on door elements with fire protection, smoke control, burglary resistance, wet room or radiation protection functions.
Designed and tested for the projects segment, user category to EN 1906 - Grade 4
Durability: Grade 7
Door weight: No classification specified
Fire resistance: Grade 0
Safety: Grade 1
Corrosion resistance: Grade 5
Security: Grade 0
Type of operation: U
Design awards
Awarded by
Standard door fitting
{Matt edition
Article number 162PBMV01230 99}