for fixing on lightweight walls with rear lining made of laminated timber boards (with waterproof bonding, at least 30 mm thick required, e.g. studs or prewall installation)
Article number BM12.2.1
for Range 801 / 805 Classic backrest rails
For installation on stationary support and hinged support rails range 801 / 805 Classic with fixing BM 12.2 for use on lightweight walls with rear lining, e.g. laminated timber boards (waterproof bonding, min. 30 mm thickness required, for example, Support stand or wall installation). Consisting of: 2 stainless steel screws diameter 10 x 95 mm and 2 centring sleeves diameter 20/11 x 11.5 mm.
Recommendation! Please check the wall type on site in case of order!
- for Range 801 / 805 Classic backrest rails
For installation on both sides on stationary support and hinged support rails range 801 / 805 Classic with fixing BM12.2 for use on lightweight walls with rear lining, e.g. laminated timber boards (waterproof bonding, min. 30 mm thickness required, for example, Support stand or wall installation)
Consisting of:
- 2 stainless steel screws diameter 10 x 95 mm
- 2 centring sleeves diameter 20/11 x 11.5 mm
Documents
| Ausschreiben.de | Link | |
| Colour Chart | Link |
Products last viewed
Electronic cartridge with sensor module
for electronic washbasin fittings
Article number 65703
Hook
Article number 162.90.01060 SC
prewall installation WC IV
sensor controlled flushing mechanism
Article number S50.02.02100
Fixing type BM12.4
Article number BM12.4
Lever Handle, female part (R technology)
Matt edition
Article number 111PBRLT 99
prewall installation WC V
manual actuation plate
Article number S50.02.01200
L-shaped support rail
version right
Article number 900.22.112XA
Washbasin profile with shelf
Article number 950.13.0006 SC
Backrest
Article number 900.51.90460 ER
Fixing material BM12.2.1
for fixing on lightweight walls with rear lining made of laminated timber boards (with waterproof bonding, at least 30 mm thick required, e.g. studs or prewall installation)
Article number BM12.2.1