Article number PS160XA2060 DC
HEWI panic bar to DIN EN 1125
stainless steel, Black deep matt powder-coated, Stainless steel handle, Approval according to DIN EN 1125 in combination with tested locks.
Show more
stainless steel, Black deep matt powder-coated, Stainless steel handle, Approval according to DIN EN 1125 in combination with tested locks.
Panic bar System 162, deep matt black powder-coated
for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf)
Handle made of stainless steel, diameter 25 mm with tubular handle made of stainless steel, diameter 30 mm. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm.
Fixing distances 436 - 485 mm, 486 - 535 mm, 536 - 585 mm, 586 - 635 mm, 636 - 685 mm, 686 - 760 mm, 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 1301 - 1440 mm and 1441 - 1580 mm. For use on timber and steel leaf doors as well as narrow stile doors, from backset 35 mm (depending on profile) as single or double-leaf door. Mounting distance 761 - 860 mm, for use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Gear unit and the thrust bearing with cover, width of the rosette 27.7 mm, width of the transmission unit 45 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit.
Surface black deep matt powder-coated
Information on the classification of the panic bar according to DIN EN 1125 can be found in the certificates of the respective lock manufacturer.
for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf)
Handle made of stainless steel, diameter 25 mm with tubular handle made of stainless steel, diameter 30 mm. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm.
Fixing distances 436 - 485 mm, 486 - 535 mm, 536 - 585 mm, 586 - 635 mm, 636 - 685 mm, 686 - 760 mm, 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 1301 - 1440 mm and 1441 - 1580 mm. For use on timber and steel leaf doors as well as narrow stile doors, from backset 35 mm (depending on profile) as single or double-leaf door. Mounting distance 761 - 860 mm, for use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Gear unit and the thrust bearing with cover, width of the rosette 27.7 mm, width of the transmission unit 45 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit.
Surface black deep matt powder-coated
Information on the classification of the panic bar according to DIN EN 1125 can be found in the certificates of the respective lock manufacturer.
Colour
Panic bar to EN 1125
Article number PS160XA2060 DC