HEWI SENSORIC Electronic washbasin fitting


AQ1.12S210XA

AQ 950 Surface finish: A = satin

Available in: DEATFRUKBEPLNLLUIRIS
Distributors
Add to wishlist
Configure

Product information

  • PVD coated stainless steel look, cubic
  • Flow rate 5 l/min
  • Mains operation 230 V
  • For cold and mixed water
  • Cold water: 3/8" T-distributor required, see accessories art. no. 65755
  • can be used with backflow preventer with dirt filter, see accessories art. no. 70247
  • Laminar jet regulator with dynamic flow rate control 5 l/min, angle adjustable and theft-proof
  • Adjustable, active, false trigger resistant infrared sensor system
  • Electronic module with adjustable detection range, hygienic flushing, continuous flushing and cleaning mode
  • Sensor parameters factory-set: follow-up time: approx. 1-2 s, continuous operation: 4 min, detection range: 200 mm, cleaning mode: 60 s, hygienic flushing is deactivated
  • Asymmetrical detection range, stable object detection
  • Settings and service also possible via app on smartphone, see accessories art. no. 65713
  • Safety cut-out in case of operating voltage failure, user-defined settings are retained
  • Without temperature adjustment lever: High hygiene, vandal and misuse proof
  • the preset temperature lies in the comfort zone of 30°C to 36°C
  • Temperature can be set and adjusted easily during assembly thanks to access on the side
  • Connection via flexible pressure hoses with interwoven hot/cold marking 450 mm long, G 3/8"
  • integrated dirt strainers
  • Brass fitting body
  • 145 mm high, 193 mm projection
  • rigid spout
  • without drain set
  • Noise class 1
  • suitable for thermal disinfection according to WRAS
  • corresponds to DIN EN 15091
  • with WELL label

Technical specifications

Material and colour
Surface
XA
Alternative surfaces
Chr
DC
Features

Certificates

  • HEWI sensoric

Downloads

HEWI colour chart
BIM
WELL Certificate
WRAS Certificate
Exploded view, year of construction since 01.04.2020
Operating instructions sensor setting (de, en, fr, nl, it, es, pl)
Installation instructions (de, en, fr, nl, it, es, pl)
Care tips (de, en, fr, nl, it, es, pl)
Maintenance electronic cartridge (de, en, fr, nl, it, es, pl)
Maintenance sensor replacement (de, en, fr, nl, it, es, pl)
2D drawing
3D drawing
Product Data Sheet
Tender specifications
Download everything

Design Awards

  • iF design award 2017
  • German Design Award 2018 - Winner
Technical information subject to alteration
Please enter the email address by which you're registered here at HEWI.
We'll send you an email with instructions on how to change your password.
Request for password change failed. Reasons for this could be:
  1. The e-mail address is not registered.
  2. You have recently requested a password change. It must be at least an hour before you can perform the Forgot Password function again.
Log In
The request to change your password has been made. You will now receive an e-mail with a link to assign a new password.