Article number 166XAH
HEWI Pair of lever handles
in H-technology, stainless steel, satin finish surface, lever handle design 166X diameter 21.3 mm, the lever handle fulfils the guidelines of the German Federal Association of Accident Insurers (Bundesverband der Unfallkassen e. V. - BUK) (safe distance from closing edge 25 mm), and the EN 179 requirements, with square spindle 8, 8.5, 9 or 10/8 mm stepped, compatible with the following roses and backplates: 315.21XAH, 219.21XAH.
Show more in H-technology, stainless steel, satin finish surface, lever handle design 166X diameter 21.3 mm, the lever handle fulfils the guidelines of the German Federal Association of Accident Insurers (Bundesverband der Unfallkassen e. V. - BUK) (safe distance from closing edge 25 mm), and the EN 179 requirements, with square spindle 8, 8.5, 9 or 10/8 mm stepped, compatible with the following roses and backplates: 315.21XAH, 219.21XAH.
EAN
4014885211150
article group
Hardware for interior doors
Sustainability
EPD
article number EAN
166XAH
Square
8 mm
Door thickness
38,1 - 48,0 mm
Material
Stainless steel
Pair of levers in H-technology
Design 166X... made of stainless steel tube in mitre cut (1.4301), diameter 21.3 mm, with stepped shoulder guide and groove, with set screw M5 as additional fixing of lever and spindle for optimal transfer of force to door leaf. The lever handle fulfils the guidelines of the German Federal Association of Accident Insurers "Bundesverbandes der Unfallkassen e. V." - BUK (safety margin to closing edge 25 mm) and the requirements of EN 179.
Surface satin finished. With square spindle 8, 8.5, 9 or 10/8 mm stepped. Compatible with the following roses and backplates:
315.21XAH, 219.21XAH
Sustainability: EPD Environmental Product Declaration
Design 166X... made of stainless steel tube in mitre cut (1.4301), diameter 21.3 mm, with stepped shoulder guide and groove, with set screw M5 as additional fixing of lever and spindle for optimal transfer of force to door leaf. The lever handle fulfils the guidelines of the German Federal Association of Accident Insurers "Bundesverbandes der Unfallkassen e. V." - BUK (safety margin to closing edge 25 mm) and the requirements of EN 179.
Surface satin finished. With square spindle 8, 8.5, 9 or 10/8 mm stepped. Compatible with the following roses and backplates:
315.21XAH, 219.21XAH
Sustainability: EPD Environmental Product Declaration
Products last viewed
Mains connection
for electronic washbasin fittings
Article number 111707
Hinged support rail Mono
Article number 900.50.21560 SC
Backplate with turn knob (H technology)
long stems
Article number 230.21XAHNRLN
Pull handle
Article number 160XA.3000G6
Mobile hinged support rail, rotatable
Matt edition
Article number 801.50B117 99
Mobile hinged support rail
Article number 805.50.211
Fixing type 2...PA
Matt edition
Article number BA2.30PAB 92
Rail with vertical support bar and shower head holder
Matt edition
Article number 801.35B210 99
Mains connection for electronic toilet roll dispenser
Article number 950.06.E01
Lever Handle (H-technology)
Article number 166XAH