Panic bar to EN 1125

System 111 panic bar, PVD coated
for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke control doors as listed in the building authority test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single or double doorsets in escape routes (inactive or inactive and active leaf).
Handle made of stainless steel tube diameter 25 mm with handle tube made of stainless steel diameter 30 mm. Handle tube as a handle positioned on one side, This enables clear visualisation of the optimum pressure point on the lock side. Connection of the stainless steel tubes by means of a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with EN 1125, Classification 2: <= 100 mm.
Centre-to-centre distances 436 - 485 mm, 486 - 535 mm, 536 - 585 mm, 586 - 635 mm, 636 - 685 mm, 686 - 760 mm, 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 1301 - 1440 mm and 1441 - 1580 mm. For use on timber and steel leaf doors as well as tubular frame doors, backset from 35 mm (depending on profile) as single or double doorset. Concealed, Loosening-proof screw connection with M5 threaded screws. Gear unit and counter bearing with masking cap, width of the rose 27.7 mm, Width of the gear unit 45 mm, No jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit.
PVD coated surface
Information on the classification of the panic bar according to DIN EN 1125 can be found in the certificates of the respective lock manufacturer.