Article number 114.23GKR 50
HEWI Pair of lever handles
in R-technology, lever handle made of polyamide with through steel core, diameter 23 mm, the lever handle fulfils the guidelines of the German Federal Association of Accident Insurers (Bundesverband der Unfallkassen e. V. - BUK) (safe distance from closing edge 25 mm), and the EN 179 and DIN 18040 requirements, with square spindle 8, 8.5, 9 or 10/8 mm stepped, compatible with the following roses and backplates: 315.23R.
Show more in R-technology, lever handle made of polyamide with through steel core, diameter 23 mm, the lever handle fulfils the guidelines of the German Federal Association of Accident Insurers (Bundesverband der Unfallkassen e. V. - BUK) (safe distance from closing edge 25 mm), and the EN 179 and DIN 18040 requirements, with square spindle 8, 8.5, 9 or 10/8 mm stepped, compatible with the following roses and backplates: 315.23R.
EAN
4014884696163
article group
Hardware for interior doors
Sustainability
EPD
Colour
article number EAN
114.23GKR 50
Square
9 mm
Door thickness
58,1 - 68,0 mm
Material
Polyamide
Pair of levers in R-technology:
Lever handle 114.23GKR in U-shaped made of high-quality polyamide with corrosion resistant steel insert, solid colour diameter 23 mm with stepped shoulder guide and groove. Installed by simply latching the lever handle into the base parts preassembled on the door. The lever fulfils the guidelines of the German Federal Association of Accident Insurance Funds (Bundesverband der Unfallkassen e. V. - BUK) - safe distance from the closing edge 25 mm.
The lever handle meets the standards of EN 179 and DIN 18040.
With square spindle 8, 8.5, 9 or 10/8 mm stepped
Compatible with the following roses and backplates:
315.23R
Sustainability: EPD Environmental Product Declaration
Lever handle 114.23GKR in U-shaped made of high-quality polyamide with corrosion resistant steel insert, solid colour diameter 23 mm with stepped shoulder guide and groove. Installed by simply latching the lever handle into the base parts preassembled on the door. The lever fulfils the guidelines of the German Federal Association of Accident Insurance Funds (Bundesverband der Unfallkassen e. V. - BUK) - safe distance from the closing edge 25 mm.
The lever handle meets the standards of EN 179 and DIN 18040.
With square spindle 8, 8.5, 9 or 10/8 mm stepped
Compatible with the following roses and backplates:
315.23R
Sustainability: EPD Environmental Product Declaration
Design awards
Awarded by
Products last viewed
Lever Handle (R technology)
Article number 114.23GKR 95
Fixing material BM12.2.1
for fixing on lightweight walls with rear lining made of laminated timber boards (with waterproof bonding, at least 30 mm thick required, e.g. studs or prewall installation)
Article number BM12.2.1
Vacant/engaged fitting
Article number 111R02.270 50
Wall plate cover for mounting plate
Article number 950.50.017XA 99
Mobile hinged support rail with floor support
Article number 801.50.215S 99
Wall plate cover for mounting plate
Article number 900.51.00260 CV
Toilet brush container
for toilet brush unit 801/802.20.100
Article number 801.20.E02 84
Lever Handle (R technology)
Article number 114.23GKR 50